Aluminum Foil Tapes (with liner) – Acrylic Adhesive
Aluminum Foil Tapes has 2 Mil dead-soft high tensile Aluminum Foil coated with an aggressive solvent based acrylic adhesive; removable paper liner. Malleable foil conforms well to irregular and curved surfaces; and will perform well at both low and elevated temperatures. Can be applied at low temps. Used for vapor barrier protection, waterproof sealing, heat reflection and dissipation, masking in paint stripping and electroplating.
- Total tape thickness 3.6 mil
- Elongation 3.5%
- Peel adhesion 72 oz/in
- Tensile 17.8 lbs/in
- Temperature range -4°F to 248°F
- 3” neutral core
47.25” (1200mm) x 1000M (1093yd) Master Jumbo Rolls Available.
Alternative to Venture #3520CW; Nashua #330; IPG #AC64; Shurtape #AF100; Electro Tape #510; 3M #431 & #973.
Note: The physical properties listed above are typical test results obtained from a series of laboratory tests and should not be used for the purpose of writing specifications. Before using this product, user shall determine the suitability of the product for his/her use; and user assumes all risks and liabilities in connection therewith. All test procedures used are in accordance with ASTM and PSTC methods.