Aluminum Foil Tapes (with liner) – High Performance Acrylic Adhesive
High performance, Acrylic Adhesive. 3 mil high strength dead soft Aluminum Foil coated with an aggressive solvent based acrylic adhesiveeasy removable paper liner. Malleable foil conforms well to irregular and curved surfaces. Excellent performance at both low and high temperatures. Can be applied at low temps. Used for waterproof sealing, vapor barrier and air leakage protection, heat reflection/dissipation, masking in paint stripping and electroplating. Excellent for die-cutting.
47.25” (1200mm) x 800M (875yd) Master Jumbo Rolls Available.
Total tape thickness 4.8 mil
Peel adhesion 72 oz/in
Service temperature range -40°F to 302°F
3” neutral core
Alternative to 3M #427; Permacel #P14; Arclad #S-5795; Ideal #489; Scapa #P178; St. Gobain #A662; Polyken #347.
Note: The physical properties listed above are typical test results obtained from a series of laboratory tests and should not be used for the purpose of writing specifications. Before using this product, user shall determine the suitability of the product for his/her use; and user assumes all risks and liabilities in connection therewith. All test procedures used are in accordance with ASTM and PSTC methods.
If you need assistance when ordering: Call Us at (877) 284-4781.