Aluminum Foil Tapes (with liner) – Acrylic Adhesive
5 mil high strength Aluminum Foil backing, combined with a high performance solvent acrylic adhesive, protected by an easy-release silicone release paper. Perfect for joining and sealing Foil-Scrim-Kraft facing laminate fiberglass blanket/duct board joints and seams. May also be used for industrial uses.
Total tape thickness 6.8 mil
Rolling Tack (11mm ball) <8.0 in
Peel adhesion 65 oz/in
Holding Power 1,200+ Min
Temperature range -4°F to 230°F
3” neutral core
Alternative to 3M #427; Permacel #P14; Arclad #S-5795; Ideal #489; Scapa #P178; St. Gobain #A662; Polyken #347.
Note: The physical properties listed above are typical test results obtained from a series of laboratory tests and should not be used for the purpose of writing specifications. Before using this product, user shall determine the suitability of the product for his/her use; and user assumes all risks and liabilities in connection therewith. All test procedures used are in accordance with ASTM and PSTC methods.
If you need assistance when ordering: Call Us at (877) 284-4781.